Modern design
Perfect fit
High durability
Free shipping within 24 hours
Individual project
Dedicated caregiver
4x rims 20 for VW Amarok I 2H OPEL Insignia A G09 OPC B Z18 TOYOTA Grand AS10 - IN5590 (B5755)
- The RacingLine rim features an industrial design reserved for Land Rover. Detailed information on the possibility of using a substitute can be found in the Store Regulations
17 YEARS ON THE MARKET Together, we develop the Polish economy
SECURITY Possibility of free order insurance - Trusted Shop Protect
QUALITY CERTIFICATE Alloy wheels have ISO, VIA JWL certificates proving their high quality
GUARANTEED QUALITY Aluminum Rims are covered by a 3-year warranty
STATIONARY SHOPS Opportunity to look at the goods closely, direct contact with an expert
In a set
Forged Alloy Wheels 20" Smitherim IN5590, 1307481416: Maximum Durability and Style!
Rims made of forged, aerospace-grade aluminum alloy 6061-T6. This is the most advanced technological process. The result is a product with exceptional hardness, damage resistance, and low weight . Forged rims 20" are characterized by outstanding elasticity, meaning that under loads (up to approximately 100 tons per cm²), they do not undergo permanent deformations or cracks. They are manufactured with exceptional precision, exclusively for the most demanding customers.
By purchasing this product, you will receive from us: ✅ 4 x new aluminum rims, ✅ 4 x manufacturer's caps, ✅ 4 x centering rings (if required), ✅ 4 x chrome valves(❌ these are not TPMS sensors)➡️ TPMS sensors ✅ Air freshener hanger ✅ Accessories in one of the 4 cartons, ❌ IMPORTANT! The set does not include screws/nuts ➡️ accessories
Give your car a unique look with 20-inch IN5590, 1307481416 wheels in color BLHM - BLACK HALF MATT. Designed for a perfect fit, these 8.5" wide wheels with a 5x120 bolt pattern and a 43.5 offset (ET) are a perfect match for models such as VW Amarok I 2H OPEL Insignia A G09 OPC B Z18 TOYOTA Grand AS10.
Thanks to precise craftsmanship and rigorous quality testing, our wheels offer excellent fit and durability. Compatible with TPMS sensors, they ensure safety and convenience. These 20-inch alloy wheels are the perfect choice for drivers who value style, quality, and safety. Check the full list of compatible models in the "Fitment Guarantee" section and order your wheels today!
Testing and research ensure high-quality alloy wheels
We offer a high-quality product thanks to the use of low-pressure casting , and the use of BLHM - BLACK HALF MATT paints to finish the rims, which are corrosion-resistant and do not react with aggressive road substances. This applies to rims without polished elements - powder-coated in a solid color. Information about the finish can be found in the product specifications.
The production process of Smitherim wheels ends with a series of tests, during which numerous tests are conducted. Only alloy wheels that have passed all the following tests are introduced to the market: ✅ tensile test ✅ radial and dynamic balancing test - with deviations up to 0,6 mm (PIMOT recommendations allow 0.8 mm) ✅ verification of the center hole - permissible tolerance up to 0,3 mm ✅ corrosion resistance test ✅ structural integrity and lack of micro-cracks are diagnosed using an X-ray machine ✅ leak test ✅ paint coating evaluation ✅ load-bearing capacity test
Alloy wheels manufactured in certified factories.
The factories where GT Fusion alloy wheels are manufactured have obtained certifications: American Smithers, TUV NORD (ISO9001, IATF16949), ISO14001, ISO45001, ISO50001, American DOT-T, Japanese VIA, Brazilian INMETRO. The specifications define the quality system requirements for products in the fields of design, production development, installation, and servicing in the automotive industry. Most production processes are fully automated. Advanced forging technology combined with international automotive industry standards enables the production of reliable products – high-quality GT Fusion alloy wheels.
Fitment Guarantee
We continuously expand our offer and update the database so you can easily find the right wheels for your car model. If you find your model in the "Fitment Guarantee" list, you can be sure that you are buying the correct wheels. However, if you have any doubts or questions, feel free to contact our Customer Service Department, where you will get answers to most questions.
We select alloy wheels according to the manufacturer's catalog parameters. For some car models or wheels, it may be necessary to use spacers, and special bolts/nuts, which you can easily find in our store in the "Accessories" section.
The risk of error is minimal, but before installation, check whether the wheels fit your car, have no deviations, do not rub against suspension parts, and do not protrude beyond the fender. It is important to verify the goods BEFORE fitting the tires onto the wheels. Fitting tires is unnecessary and will prevent the correct diagnosis of the product. Alloy wheels should be fitted on both axles of the vehicle. However, if you visit a service/shop, inform the tire fitter to perform the above tasks first.
Accessories in one of the four boxes
Upon receiving your order, check if the package contains all the products you purchased. Caps and other accessories may be attached to the bottom of the box or be in one of the four boxes.
Tech specs:
The model:determines the appearance of the rim. By entering the model in the LadneFelgi.pl store search engine, you can search for rims in different colors and with other parameters.
Rim size: refers to the diameter of the rim given in inches (1 inch = 2.54 cm). The possible sizes are predetermined by the vehicle manufacturer. Using rims smaller than those specified by the manufacturer is not allowed.
Rim width: is measured between the rim flanges. The dimension is in inches. When choosing tires, take into account the width of the rim and the car manufacturer's recommendations.
Wheel PCD: determines the number and spacing of mounting holes. This is the diameter of the circle with the centers of these mounting holes. The diameter of the circle is given in millimeters.
ET, offset: is not a strictly defined parameter, such as spacing. It depends on the width of the rim. ET is given in mm. The smaller the offset, the more the rim is, which increases the wheelbase, positively influencing the car's stability. The service book or ASO provides only the parameters of the currently installed rims.
Center bore: it is the dimension of the rim center hole diameter given in mm. If the car has a smaller hub diameter, centering rings are used. The ring is used to center the rim in relation to the car's hub. After screwing it, no force acts on it. It is a safe solution used by all rim manufacturers.
Color: determines the colors in which the offered item was made. Pictures are taken under natural lighting.
Certificates: confirm the compliance of the wheels with applicable quality and safety standards based on durability and quality tests. Some certificates, such as TÜV, additionally confirm that the wheels meet specific technical requirements related to compatibility with a particular vehicle model.
Aluminum wheel manufacturing technology: affects their strength, weight, and aesthetics. There are three main production methods:
-
Gravity casting – the most popular method, in which molten aluminum alloy is poured into a mold. It provides good quality and an affordable price, but the wheels are slightly heavier than those made with other technologies.
-
Low-pressure casting – an improved version of gravity casting, where the alloy is forced into the mold under pressure. This makes the wheels lighter and more durable.
-
Flow Forming – a technology combining casting with rolling, which increases strength and reduces weight, bringing the wheel’s parameters closer to forged models.
-
Forging – the most advanced technique, in which the wheel is formed under enormous pressure. Forged wheels are extremely light and strong but also the most expensive.
Load capacity: defines the maximum load in kilograms per single vehicle wheel. This parameter is directly related to the vehicle’s GVW (Gross Vehicle Weight), as the minimum load capacity of one rim should be at least one quarter of the vehicle’s GVW.
4 identical: the set consists of 4 identical rims, suitable for installation on all wheels of the vehicle.
Mixed: the set includes 2 rims intended for the front axle and 2 for the rear, taking into account possible differences in ET parameters or rim width.
4 wheels: the tires and rims on both axles of the vehicle have identical parameters.
The working shape of the screw head, must correspond to the shape of the mounting hole made in the rim. We distinguish between spherical( spherical), conical or flat sockets for flat rim holes. The standard is a cone with an angle of 60 degrees
