Tires Firestone VANHAWK 2 WINTER EVO Enliten 205/75 R16 113R

Tire size: this is the tire size designation, for example 225/45 R18:

225 – tire width in millimeters,
45 – aspect ratio, meaning the sidewall height is 45% of the tire width,
R – indicates radial tire construction,
18 – inner diameter of the tire (rim size), expressed in inches.

Tire width: the measurement defining the distance between the tire’s side edges (measured in millimeters). Wider tires provide a larger contact area with the road, which can improve grip but may also increase rolling resistance and fuel consumption. Narrower tires generally perform better in wet and winter conditions but offer a smaller contact area with the road.

Tire profile: is the percentage ratio of the sidewall height to the tire's width. A lower profile means a smaller sidewall height relative to the width – such tires usually offer better handling precision, but at the cost of comfort and increased susceptibility to damage. A higher profile provides better shock absorption and greater ride comfort, although it may slightly reduce cornering stability.

Tire diameter: the value given in inches that specifies the size of the rim for which the tire is intended. It affects the tire’s fit to the wheel and indirectly influences handling and ride comfort.

Tire manufacturer: a company responsible for designing and producing tires. Each manufacturer uses its own technologies and rubber compounds, which affect the quality, performance, and durability of the offered tires.

Tread pattern refers to the specific design of the arrangement of blocks, grooves, and sipes on the tire surface. Its construction affects grip, water evacuation, and noise levels, as well as the tire’s adaptation to different driving conditions (e.g., dry, wet, or winter surfaces).

The speed index is a letter designation that indicates the maximum speed at which a tire can safely operate while maintaining the allowable load. According to the law, a tire should have at least the speed index (and load index) recommended by the vehicle manufacturer. It is possible to use tires with a higher speed index, which is often permitted by the vehicle manufacturer.

The load index (also known as the load rating) is a numerical indicator that specifies the maximum permissible load a single tire can carry at the recommended pressure and within its speed rating. Each numerical load index corresponds to a specific weight (given in kilograms), e.g., 91 means 615 kg.

Tire season: indicates the weather conditions for which the rubber compound and tread pattern are designed. Summer, winter, or all-season. A compromise between summer and winter tires; they perform well in various climatic conditions, but in extremely hot or winter climates they are significantly inferior to dedicated tires.

The tyre label (EU label) is an official marking introduced in the European Union that provides information about the basic parameters of a tyre and its impact on safety and the environment.

Fuel efficiency (rolling resistance): rated from A (lowest rolling resistance, highest efficiency) to E (highest rolling resistance). A change of one class (e.g. from B to A) can result in 1–2% fuel savings. For someone driving around 30,000–40,000 km annually, this could mean saving several hundred PLN on fuel each year.

Wet grip

Indicated by letters from A (best grip) to E.
It affects braking distance and driving stability in rainy conditions.
A ↔ B: a difference of a few meters between classes.
A ↔ E: the difference can be several meters (up to around 18 m) at a speed of 80 km/h.

In the EU, noise levels are labeled with letters: A, B, or C (A – quietest). In addition to the letter, a specific value in decibels is given, allowing for more accurate comparison between tyres. A 3 dB difference equals a doubling/halving of acoustic energy (sound intensity), but our subjective perception of loudness changes noticeably only at around a 10 dB difference (then the sound seems about twice as loud or quiet).

Run on flat: (also known as RFT from “Run Flat Tires”) are tires with a special construction (reinforced sidewalls) that allows continued driving after a loss of pressure (e.g., in case of a puncture).

In Poland, the PN-C94300 standard "Tyres – packaging, storage and transport" is in force. According to its guidelines, tires can be placed on the market, stored, distributed, and sold without restrictions for up to 3 years from their production date. The tires retain all their safety and performance properties.